43
Timer operation
Application section
Reserve the timer operation.
÷
Press the remote's
TIMER
key repeatedly until "
O.T.T.
"
lights up.
÷
To cancel the timer reservation after it has been activated,
press the
TIMER
key while the unit is ON so that all of the
timer-related indicators are turned off. (The setting made
above is still left in memory.)
÷
When the O.T.T. timer is set while the PROG.1 or
PROG.2 timer has been set, the reservation by the
PROG.1 or PROG.2 timer is canceled.
3
Put the unit in standby mode.
÷
When the unit enters the Standby mode, the
standby/timer
indicator lights in green.
÷
If there is a power failure or the power cord is un-
plugged after the timer reservation has been activated,
the
standby/timer
indicator blinks in green. In this
case, the clock setting should be restarted from the
beginning.
4
Each press switches the timer as follows.
1
"O.T.T."
2
"PROG.
1
"
3
"PROG.
1
2
"
4
"PROG.
1 2
"
5
Extinguished
TIMER
Set the time at which you want to start playback or reception (On time).
1
Adjust the time.
2
Set it.
÷
In other areas than the U.K. and Europe the clock
shows the time of the day in the 12-hour system.
÷
The ON time can be set in steps of 5 minutes.
÷
If you make a mistake, press the
menu
key and restart
from step
1
.
2
To check or modify the reservation contents, restart the timer reservation from the beginning.
The time is
advanced
The time is
returned
volume / multi control
set / demo
C D
POWER
