36
Convenient recording methods
Application section
Records all tracks in a CD with a simple operation. (All-track recording)
Records a single CD track being played from the beginning. (Single-track recording)
Make preparation for recording.
Be sure to put the cassette deck in stop mode.
1
Perform steps 1 to 3 of the procedure in "Recording on TAPE".
•
2
Ensure that the "PGM" and "RANDOM" indicators are not lit.
3
Insert disc in the CD player.
1
÷
If the "
PGM
" indicator is lit, turn it off by pressing the
PGM
key in stop mode to cancel the program mode.
÷
If the "
RANDOM
" indicator is lit, turn it off by pressing the
RANDOM
key to cancel the random play mode.
Check the current play mode of the CD player.
2
Select the desired CD track and play it.
If it is in play mode, stop it.
All-track recording
Single-track recording
÷
When step
3
is performed in the middle of CD play-
back, the current track will be recorded from the begin-
ning.
Start recording.
3
÷
When either playback or recording stops, the other op-
eration is stopped automatically.
(To record other tracks, repeat steps
2
and
3
for each
track)
To interrupt a recording
(Recording and playback will be stopped)
At the end of the recording
Cassette deck
:
Stop is executed after an unre-
corded portion of about 4 sec.
has been produced.
7
stop
Tuning
Mode
TAPE O.T.E.
7
stop
Tuning
Mode
If you are operating the remote, the same effect
as step
3
can be obtained by simply pressing the
TAPE O.T.E. key to start recording.
One-touch edit recording
(CD
=
TAPE)
The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on
Metal (Type
) tapes.
