24
Playback of tape
Basic section
M E M O R Y
One-by-one presetting
(Manual preset)
1
Select the AUTO or MANUAL mode.
2
Tune a station.
Tuning a non-preset radio station
(Auto tuning, Manual tuning)
Select the tuning mode according to the radio
wave receiving condition.
When the receiving condition is good: AUTO
mode
When it is poor due to weak radio waves:
MANUAL mode
In AUTO mode :
The next preset station can be received automatically
every time the
TUNING UP/DOWN
(
1
or
¡
) key is
pressed.
In MANUAL mode :
Press the
TUNING UP/DOWN
(
1
or
¡
) key repeat-
edly until the desired station is received. The desired
station can also be received by holding the
TUNING
UP/DOWN
(
1
or
¡
) key depressed until its fre-
quency is displayed.
To increase
frequency
To decrease
frequency
Each press alternates the mode.
1
"AUTO" :
Stereo reception("
AUTO
" lit)
2
"MANUAL" :
Monaural reception ("
AUTO
" not lit)
1
Perform the procedure in "Tuning a non-
preset radio station (Auto tuning, Manual
tuning)" to receive the station to be preset.
2
Press the ENTER key during reception.
3
Select one of the preset numbers from
1 to 30.
4
Press the ENTER key again.
÷
In MANUAL mode, FM stations are received in monau-
ral.
÷
Normally, use the
AUTO
(Auto tuning, stereo reception)
mode.
÷
A maximum of 30 stations of the band presently being
received will be preset.
(Repeat steps
1
,
2
,
3
and
4
to preset other sta-
tions)
÷
If several stations are preset under the same number,
the previous memory is replaced with the latest
memory contents.
(Proceed to step
3
while "MEMORY" is lit.)
1
1
TUNING
ENTER
5
2
8
0
6
3
9
4
1
7
10
4
4
P.CALL
ENTER
"
MEMORY
" lights (for approx. 20 sec.)
Receiving broadcast station
Remote control unit only
STOP
7
AUTO/MONO
