Kenwood FleetSync KDS-100, Instruction Manual

Page: 12 / 86

8
■
S
ELCALL
If you are making a selcall in response to a message, transmission begins as
soon as you press [SELCALL]. However, if you are making a new selcall,
select a recipient using the
▲
and
▼
keys to scroll through the list in your
terminal, then press [CONNECT] (key 1). A message will appear on the
display, confirming that you are calling the recipient.
M
ENU
M
ODE
To enter Menu mode, press the MENU key momentarily. In Menu mode, you are
given the following options:
[STATUS] (key 1) allows you to make a status call. Refer to “Sending
Messages”, above.
[SELCALL] (key 2) allows you to make a selcall call. Refer to “Sending
Messages”, above.
[REMOTE] (key 3) allows you to use the terminal as a remote controller for your
mobile unit. Keys 1 ~ 5 function as follows: System/Group Up, System/Group
Down, Group/Channel Up, Group/Channel Down, and Exit Remote Mode
(respectively). The
▲
and
▼
keys function as volume up and volume down. The
display shows the operating system/group and group/channel.
Note: The REMOTE key may not appear on some transceivers.
[CANCEL] (key 5) returns you to the previous display.