PRECAUTIONS ON SCHEMATIC DIAGRAMS
Due to the improvement in performance, some part numbers shown in the circuit diagrams
may not agree with those indicated in the Parts List.
The parts numbers, values and rated voltage etc. in the Schematic Diagrams are for
reference only.
Since the circuit diagrams are standard ones, the circuits and circuit constants may be
subject to change for improvement without any notice.
PRECAUTIONS ON PARTS LIST
The parts identified by the
symbol are critical for safety. Whenever replacing these parts, be sure to
use specified ones to secure the safety.
The parts not indicated in this Parts List and those which are filled with lines --- in the Parts No.
columns will not be supplied.
P.W. BOARD Ass'y will not be supplied, but those which are filled with the Parts No. in the Parts No.
columns will be supplied.
There are cases where the actual implemented parts in the sets and the service parts are different.
When ordering parts, make sure to refer to the Parts List.
DEVIATION TOLERANCE RANGE
DEVIATION TOLERANCE RANGE
F
G
J
K
M
N
R
H
Z
P
1% 2% 5%
10% 20% 30% +30%
-10%
+50%
-10%
+80%
-20%
+100%
-0%
(No.WA063<Rev.003>)2/17
