25
DNX4280BT/5180/5280BT/5380/5380M
/5380BT/5580BT/6040EX/6180/6480BT/6980
Result display speci
fi
cation
– – –
: Test not performed or testing.
OK
: Test result OK.
NG
: Test result NG.
Test procedure
q
Connect the test jig while displaying the Test Mode Main
screen.
w
Press the [Steering Remote] key in the Test Mode Main
screen. Then, it will transfer screens to the left
fi
gure of
the Figure 2.2.12, and the Steering Remote test is start-
ed. For determining criteria, refer to the Table 2.2.12.
Test item
Pull Up resis-
tance value
Input terminal
Consider OK
input voltage
Steremo Key1
(Pull up 4.7k
Ω
)
4.7k
Ω
STEREMO_KEY1
1.1~1.4V
Steremo Key2
(Pull up 4.7k
Ω
)
4.7k
Ω
STEREMO_KEY2
1.1~1.4V
Steremo Key1
(Pull up 460
Ω
)
460
Ω
STEREMO_KEY1
3.7~4.0V
Steremo Key2
(Pull up 460
Ω
)
460
Ω
STEREMO_KEY2
3.7~4.0V
Table 2.2.12 Steering Remote determining criteria
e
Once all the test items are completed, screen is trans-
ferred according to the result.
2.2.13 Navigation Test screen
Perform test for Navigation.
Figure 2.2.13 shows the display contents of the Navigation
Test screen.
Navigation Test
Information
TMC
Unit ID
GPS Reception
Auto
Return
Figure 2.2.13 Navigation Test screen
Key Speci
fi
cation
Auto
: Transfer to Auto Test screen.
This key is displayed inactive until the Navigation
is started up.
GPS Reception
: Transfer to GPS Reception screen.
This key is displayed inactive until the Navigation
is started up.
Information
: Transfer to Navi Information screen.
This key is displayed inactive until the Navigation
is started up.
TMC : Transfer to TMC screen.
Unit ID : Transfer to Unit ID screen.
This key is displayed inactive until the Navigation
is started up.
However, this key will be hidden in the release ver-
sion. (Vx.x.0)
Return : Transfer to Test Mode Main screen.
2.2.13.1 Auto Test screen
Perform multiple Navigation test automatically (require tes-
ter input for some part).
Start the test at the same time it transfers to Auto Test
screen.
Figure 2.2.13.1 shows the display contents of the Auto Test
screen.
Navigation Auto Test
1. Navi Voice Test
Message display area
Result
Return
Stop
Next
2. Memory Card Test
Result
3. TMC Test
Result
4. GPS 3D Fix Test
Result
5. Unit ID & Unlock Code
Result
6. Initialize
Result
Figure 2.2.13.1 Auto Test screen
Key Speci
fi
cation
Next
: Start next test.
Stop
: Stop testing.
Return : Transfer to Navigation Test screen.
The above 3 keys will change their display/hide status de-
pending on the test status.
∗
Background color will be blue when all the tests are “OK”.
Background color will be red if there is even 1 item that is
“NG” within the tests.
TEST MODE
