Kenwood DNX4310DAB, Instruction Manual

Page: 25 / 55

48 48 49
Return to the Top page
Radio, Digital Radio, TV
Return to the Top page
Radio, Digital Radio, TV
TV Basic Operation
Most functions can be controlled from the source control screen and TV screen.
NOTE
• Set the remote controller mode switch to TV mode before starting operation, see Switching the operation mode
(P.89) .
• You can only operate TV with the optional accessory TV tuner KTC-V500N/PV300/N/P connected.
• During playback, press the <MENU> button to display the source control screen.
1
2 2 3 3
4
1
Simple Control screen List Control screen
5 5
1 Information display/Control switching area
Displays the following information.
•
[TV1], [TV2] : Band display
• Preset # : Preset number
• Group : TV area group
• #ch : Channel display
Touching this area switches between the Simple Control and List Control screen.
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.49) .
3 Preset key (analog TV only)/Multi function menu
Recalls the memorized channel. When touched for 2 seconds, store the current receiving station or
channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
Multi function menu (P.49)
.
4 Preset list (analog TV only)
Displays the list of preset channels.
5 Sub function menu
The following function can be performed by using keys in this area.
•
Hide all keys : Touch [ ].
• Switches the channel : Touch [
4
] [
¢
] .
• Switches the band : Touch [BAND] .
TV screen
6 6
7 8
6 Switching channel area
Touch to switch the channel.
7 Switching band area
Touch to switch the band.
8 Key display area
Touch to display the last control screen.
Multi function menu
Analog TV Digital TV
The functions of each key are as follows.
[P1] - [P6] (analog TV only)
Selects the preset channel. Touch for 2 seconds to store the current station into the preset memory.
[ ]
Displays the list of preset channels.
[
4
] [
¢
]
Switches the channel.
[BAND] (analog TV only)
Touch to switch the band.
[SEEK] (analog TV only)
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
•
AUTO1 : Tunes in channels with good reception automatically.
• AUTO2 : Tunes in channels in memory one after another.
• MANUAL : Switches to the next channel manually.
[AME]
Selects the auto memory mode. For details, see Auto memory (P.50) .
[ SETUP]
Touch to display the SETUP Menu screen. See Setting Up (P.70) .
[ AUDIO]
Touch to display the Audio Control screen. See Controlling Audio (P.82) .
[ REAR ]
Touch to mute the rear speaker.