Kenwood DNX4310DAB Page 9 Instruction Manual Download

Page: 9 / 55

Return to the Top page

Basic Operations

Return to the Top page

Basic Operations

perating With The Top Menu Screen

Most functions can be performed from the Top Menu screen.

Touch [Menu] on any screen.

NOTE

• If [Menu] is not

displayed during
video/picture
playback, press the
<MENU> button.

(P.6, P.8)

Top Menu screen appears.

NOTE

• You can select the

hiding icon by
scrolling the screen
left or right.

From this screen, you can perform the following functions.

Function

Icon

Operation

Switch the audio source

etc.

Touch the icon of the
desired source.

Enter setup mode

etc.

Touch the icon of the
desired setup function.

Display navigation
screen

Touch [NAV] or
navigation information.

Turn off all audio
function

Touch [STANDBY].

●

Customizing Top Menu screen

Drag the icon you want to register to the
upper line.
You can move up to three icons.

Summary of Contents for DNX4310DAB
























































Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands

Kenwood DNX4310DAB, Instruction Manual

Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands