Kenwood DNX4310DAB Page 7 Instruction Manual Download

Page: 7 / 55

Return to the Top page

Basic Operations

Return to the Top page

Basic Operations

Touch [Finish].

NOTE

• These settings can be set from the SETUP menu. See

Setting Up (P.70)

ow To Play Media

Music CD and disc media

Insert the disc into the slot.

The unit loads the disc and playback
starts.

●

To eject the disc:

Press the <

> button.

USB device

Connect the USB device with the
USB cable.

The unit reads the device and playback
starts.

●

To disconnect the device:

Touch [

] for 1 second on the screen and

disconnect the device from the cable.

iPod

Connect the iPod with the iPod
cable.

The unit reads the iPod and playback
starts.

●

To disconnect the device:

Touch [

] on the screen and then touch

[

] for 1 second. Disconnect the iPod

from the cable.

Summary of Contents for DNX4310DAB
























































Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands

Kenwood DNX4310DAB, Instruction Manual

Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands