Kenwood DNX4230BT, Instruction Manual

Page: 9 / 125

88
Return to the Top page
Basic Operations
DNX5230DAB/DNX5230BT
4 3 1
2
5
6
9
7
8
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX5230DAB and DNX5230BT :
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
1) Slide the
4
Release key upward to detach the
part of the front panel.
2) Hold the microSD card with the label side facing
left and the notched section up, and insert it
into the slot until it clicks.
●
To eject the card:
Push the card until it clicks and then remove your finger
from the card.
The card pops up so that you can pull it out with your
fingers.
NOTE
• When detaching a part of the front panel, detach it
toward the front side as shown in the diagram right. If it
is detached upward, the front panel will be broken.
1
2
10