![Kenwood DNX4230BT Instruction Manual Download Page 78](http://html.mh-extra.com/html/kenwood/dnx4230bt/dnx4230bt_instruction-manual_188487078.webp)
77
View Camera Control
You can set up display when a CMOS-300
Series view camera is used.
1
Press the <AUD> button for 1second.
Camera view screen appears.
2
Adjust each item as follows.
3
2
1
1 Guideline
Touching each time turns on or off the
guideline display alternately.
2 Switching the View Camera
Touching each time changes between the
front view camera and rear view camera.
3 Angle
Touching each time changes camera angles in
the following order:
Super wide view/ Wide view/ Overhead view/
Wide view + Top view/ Corner view
NOTE
• The video camera controls described above
may not be operable depending the connected
cameras.
System Setup
NOTE
• Each operation in this section can be started from
the multi function menu.
1
Touch [Menu] on any screen.
TOP Menu screen appears.
2
Touch [SETUP].
3
Touch [System].
System Menu screen appears.
See the following section for each setting.
•
Set up the user interface
•
Adjust touch panel
•
Set up security
•
Set up memory
Summary of Contents for DNX4230BT
Page 34: ...33 Return to the Top page DVD VCD ...
Page 64: ...63 Return to the Top page Radio ...
Page 74: ...73 Return to the Top page Bluetooth Operation ...
Page 125: ......