Kenwood DNX4230BT, Instruction Manual

Page: 14 / 125

13
Return to the Top page
Basic Operations
Initial setup
Perform this setup when you use this unit first time or when you reset the unit (P.109) .
Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is “British English (en)”.
1
Touch [SET].
2
Touch [
2
] or [
3
] to select the desired language.
3
Touch [Enter].
For detailed operation, see Language setup (P.79) .
Angle
Adjust the position of the monitor. Default is “0”.
1
Touch [SET].
2
Touch desired angle number and [ ].
For detailed operation, see Monitor angle control (P.82) .
iPod AV Interface Use (DNX4230DAB, DNX4230BT)
Set the terminal which your iPod is connected to. Default is “iPod”.
1
Touch [iPod] or [AV-IN2].
AV-IN SETUP (DNX4230TR)
Select the source connected to AV-IN.
1
Touch [SET].
2
For AV-IN Interface, touch [Rear Camera] or [AV-IN] to select the source.
3
For AV-IN Name, touch [
2
] or [
3
] to select the name.
Select the source connected to AV-IN2.
1 Touch [SET].
2
For AV-IN2 Interface, touch [iPod] or [AV-IN2] to select the source.
3 For AV-IN2 Name, touch [
2
] or [
3
] to select the name.
For detailed operation, see AV Input Setup (P.88)
1
Continued