How
You ca
Navigat
After pa
please b
to Pair an iPhone
n initiate pairing from either the iPhone (Method 1) or the Kenwood
ion System DNX4210BT-OP or DNX4210DAB-OP (Method 2).
iring the initial download of your phonebook may take up to 5 minutes,
e patient.
NOTE:
During initial pairing it is normal for the phone to connect/disconnect several times.
Pairing From the iPhone:
Method 1
- Make the iPhone discoverable:
1. Select
“SETTINGS”
on the iPhone
2. Select
“BLUETOOTH”
3. Ensure that the Bluetooth is
“ON”
The phone will search for available devices.
4. Select
“ DNX4210BT”
or
“DNX4210DAB”
from the list
5. Enter the default pin code
“0000”
when prompted. The iPhone will connect after 30 seconds to 1
minute.
6. Select “PAIR” when prompted on the iPhone
Pairing From the Kenwood Navigation System:
Method 2
- Make the iPhone discoverable:
1. Select
“SETTINGS”
on the iPhone
2. Select
“BLUETOOTH”
3. Ensure that the Bluetooth is
“ON”
On the Kenwood Navigation System:
METHOD 1
METHOD 2
4. Select
[TEL]
either on screen icon or hard key
The Kenwood Navigation System will search
for available devices.
7. Select
the
“iPhone”
from the list
8. Enter the default pin code
“0000”
when
prompted. The phone will connect after 30
seconds to 1 minutes
9. Select
“PAIR”
when prompted on the
iPhone
6. Select
[REGISTER NEW DEVICE]
5.
Select
[BT SET-UP]
2
