13. The next page will ask you where you have stored the data files.
Click “Browse” and select the new folder that you created earlier called
“speed camera
database”
and change the other settings as below
18
Set to
poi
Set to
Feet and MPH
Set to
Express (Recommended)
14. Then click “Next” and the POI Loader software will create the necessary folders and files on your
USB device.
15. Confirm that your USB device has the following folders and file:
Garmin/POI/poi.gpi
Note:
You can manually rename the filename at this point if it is necessary. So for example,
if the file shows as ‘poi.poi’, you will need to rename it to
‘poi.gpi’
Upload to Kenwood Navigation System:
16. Power up Kenwood navigation System
17. Select
[NAVI]
18. Go to the
“WhereTo/View Map”
screen.
19. Connect the USB stick to the USB input and follow the on-screen instructions to upload the
safety camera database.
20. When complete you can remove the USB device.
Please ensure that you do not interrupt the upload or turn off engine until completely finished.
This update can take up to 5-10 minutes to complete.
Fig 13
