Connection/Installation
81
English
Ñ
Connecting the system and
external components
4
3
2
1
5
6
7
8
9
10
13
14
15
11
12
1
HDMI/MHL input
(DDX9717BTS only)
MHL maximum power supply current :
5 V
=
900 mA
When you connect the cable to HDMI/MHL
terminal, remove the fixture. After connecting
the cable, put the fixture again.
HDMI/ MHL connector
Fixture
2
DAB antenna CX-DAB1 (Optional accessory)
(DMX7017DABS only)
!
Use of a CX-DAB1(optional accessory) as a DAB
antenna is recommended.
When using a commercially available DAB
antenna, the diameter of the SMB connector
must be Φ6.5 mm or less.
Φ 6.5 mm (maximum)
3
AV Audio output (ø3.5 mini jack)
4
FM/AM antenna input
5
When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
6
External I/F
(DDX9717BTS only)
Maximum power supply current :
12 V
=
500 mA
7
TV tuner remote output
(DDX9717BTS only)
8
DDX9717BTS :
AV-IN (CA-C3AV; Optional Accessory) input
DMX7017DABS/ DMX7017BTS :
AV-IN (CA-C3AV; Optional Accessory)/
Dashboard camera input
9
Dashboard camera interface
Connect a Dashboard Camera DRV-N520
(optional accessory).
10
Accessory
7
: GPS Antenna
11
Accessory
4
: Bluetooth Microphone
12
Connect to vehicle’s steering remote harness.
Contact your KENWOOD dealer for details.
13
Rear view camera input (Yellow)
14
Front view camera/ Dashboard camera input
(Yellow)
(DDX9717BTS only)
15
Visual Output (Yellow)
