3
English |
Continued on the next page...
Getting Started
1
Turn the ignition key of your car to ACC.
The unit is turned on.
2
Press the <
8
MENU> button.
3
Touch [
].
4
Touch the corresponding key and set the value.
[System]
[Beep Tone]
Activates or deactivates the key-touch tone.
“ON” (Default), “OFF”
[Language]
Select the language used for the control screen
and setting items. Default is “English”.
[Time/Date]
Adjust the clock time.
[Clock Mode]
Select the time display format.
[12hr] (Default) / [24hr]
[Steering Remote]
Sets the desired function in the steering remote
controller.
[Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position. Default is “ON”.
[Guidelines SETUP]
If you select [ON] for [Parking Guidelines], you can
adjust the parking guidelines.
[Rear AV In]
Set up the input device of the AV-IN terminal.
AV-IN (Default):
Select when AV device is
connected. Use as an [AV-IN] source.
DRV:
Optional use. *
1
[Camera In]
Set the camera to be displayed when you shift
the gear to the reverse (R) position.
Rear Camera (Default):
Select this when the rear
view camera is connected.
DRV:
Optional use. *
1
[System Reset]
Touch
[System Reset]
and then touch
[YES]
to set
all the settings to the initial default settings.
[Bluetooth]
Displays the Bluetooth Settings screen.
[Screen]
[Dimmer]
Select the dimmer mode.
“High” (Default) / “Mid” / “Low”
[Demo]
Select the demonstration mode. Default is “ON”.
*1 For details, see the instruction manual of the
Dashboard Camera (optional accessory).
5
Touch [
6
].
Clock settings
Ñ
Synchronizing the clock time with FM
RDS
Activate [RDS Clock Sync].
See Radio Setup (P.5).
Ñ
Adjusting the clock manually
✎
NOTE
• Deactivate [RDS Clock Sync] before adjusting the
clock.
1
Press the <
8
MENU> button.
2
Touch [
].
3
Touch [System].
4
Touch [Time/Date].
Clock screen appears.
5
Touch [
R
] or [
S
] to set the clock time.
6
Touch [
6
].
_B5K-0673-12_DMX1025BT_M_QSG.indb 3
2019/06/17 9:36
