Kenwood DMF-3020 Instruction Manual Download

Page: 28 / 56

DMF-5020/DMF-3020/MD-203 (En)

Each press switches the mode.

goes off

(AUTO) :

Track numbers are marked automatically.

MANUAL

Track numbers can be marked as desired.

The unit enters record-pause mode automatically when the

key is

pressed.

Play the source to be recorded.

Adjust the recording level.

Decrease the level if the red segments of the peak level meter light.

Extinguished in

“AUTO”

mode, lit in

“MANUAL”

mode.

Recording is not possible if the following characters are displayed.

“DISC FULL”

: Disc is full

Erase undesired tracks.

“PROTECTED”

: The accidental erasure protect tab is open.

Close it.

“PLAY ONLY”

: A playback-only Mini Disc is loaded.

Load a recordable Mini Disc.

When the

EDIT / SPACE

key is pressed during recording, a track

number is inserted in that position.

After recording, eject the Mini Disc.

Start recording.

Information is
being written.

Mini Disc has been ejected.

Select “AUTO” or “MANUAL”. (Remote control unit only)

Adjust the recording level. (Main unit only)

To increase
level

To decrease
level

Press the

key.

Play the source to be recorded from the beginning.

Recording (ANALOG input)

OVER (

−

dB)

MANUAL

0 0 1

∞

SEARCH

PGM

MONITOR

ANALOG

32kHz

48kHz

44.1kHz

DIGITAL

N O

D I S C

WRITING

EJECT

The eject (

)key is not accepted during recording.

While “WRITING” is displayed, do not apply shock
or vibration to the unit because information is
being written on the Mini Disc.

Note

Enter record-pause mode.

AUTO/MANU.

REC

(DMF-3020/MD-203)

(DMF-5020)

MIN

REC LEVEL

MAX

Summary of Contents for DMF-3020

























































Search results

Summary of Contents for DMF-3020

Reviews:

Related manuals for DMF-3020

Brands by name

Popular brands

Kenwood DMF-3020, Instruction Manual

Search results

Summary of Contents for DMF-3020

Reviews:

Related manuals for DMF-3020

Brands by name

Popular brands