![background image](http://html.mh-extra.com/html/kenwood/dm-9090/dm-9090_instruction-manual_191155024.webp)
DM-9090 (En)
24
Each press switches the mode.
1
REC MODE :
off
2
REC MODE :
on (
“D.REC LEVEL?”
displayed.)
1
Switch the REC MODE on.
2
Select the setting adjustment mode.
3
Set the selection (by pressing the JOG
DIAL).
4
Adjust the setting value.
The recording-related settings can be adjusted precisely by selecting the proper display modes.
÷
The
“D.REC LEVEL”
and
“FADE TIME”
settings are not used during
analog source recording.
÷
Step
4
consists of adjusting the setting of the
“Setting adjustment
mode”
selected in step
2
.
Selecting the setting adjustment mode
The modes are switched by rotating the JOG DIAL.
1
D. REC LEVEL?
:
Digital recording level setting.
2
AUTO TIME?
:
Setting of the time for detecting a no-sound
blank section during automatic track num-
ber marking.
3
AUTO LEVEL?
:
Setting of the level for detecting a non-
sound blank section during automatic track
number marking.
4
FADE TIME?
:
Setting of the fading time in fade-in and
fade-out.
5
REC
=
WRITING? :
Setting of the UTOC writing after recording.
To change another setting, press the
JOG
DIAL (PUSH SET knob)
.
(This returns to step
2
above.)
To end the setting adjustment, press the
REC
MODE/CHARA.
key again.
REC MODE key
Recording-related keys
REC MODE
/CHARA.
4
¢
U P
DOWN
PUSH SET
JOG DIAL
4
¢
U P
DOWN
PUSH SET
JOG DIAL
4
¢
U P
DOWN
PUSH SET
JOG DIAL
Summary of Contents for DM-9090
Page 55: ...DM 9090 En 55 MEMO ...