16
2
ND
METHOD: Programming the time when cooking will be completed.
• Set the oven (function and temperature) as indicated in the “USING THE OVEN - COOKING
FUNCTIONS” chapter.
• Set the time when cooking will be completed (“
hh:mm
” - hours and minutes) by pressing
button “
” (“ : ” symbol flashes on the programmer display) and then button “
” to
move forward or “
” to move back if you have gone beyond the required time. Set it to
ten minutes less than the time required because the stored heat will complete the cooking.
• “
A
” letter and “
” symbol appear on the programmer display; the oven starts to operate
immediately and it will switch off automatically at the end of the cooking time (an inter-
mittent acoustic signal sounds, the “
A
” letter and “
” symbol flash on the programmer
display and the oven lamp is lit - press any pushbutton of the programmer [not ON/OFF]
to stop the intermittent acoustic signal).
• During cooking press button “
” (press two times if the oven lamp is not lit - first press
lights only oven lamp) to display the time when cooking will be completed.
• During cooking press button “
” (press two times if the oven lamp is not lit - first press
lights only oven lamp) to display the remaining duration of the cooking (countdown).
• The cooking program can be cancelled at any time as indicated in the "CANCELLING A
SET PROGRAMME" chapter.
1
2
3
4
5
6
7
8
9
10
11
12
1
3
2
1
- Time when the oven is programme (
10:00
)
2
- Time when cooking will be completed (
12:00
)
3
- Duration of the cooking (2 hours).
CAUTION: after a black-out three zeroes
"0:00" appear on the display.
The semi-automatic cooking is cancelled.
Example
OR
