28
ANTI-TILT BRACKET
Important!
To restrain the appliance and prevent it tipping accidentally, fit a bracket to its rear
to fix it securely to the wall.
To fit the anti-tilt bracket:
1 . After you have located where the cooker is to be positioned, mark on the wall the place
where the two screws of the anti-tilt bracket have to be fitted.
Please follow the indications given in fig. 8.8.
2 . Drill two 8 mm diameter holes in the wall and insert the plastic plugs supplied .
Important!
Before drilling the holes, check that you will not damage any pipes or electrical
wires.
3 . Loosely attach the anti-tilt bracket with the two screws supplied .
4 . Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can
engage in the slot on the cooker’s back, as shown in fig. 8.8.
5 . Tighten the screws attaching the anti-tilt bracket .
6 . Push the cooker against the wall so that the anti-tilt bracket is fully inserted in the slot
on the cooker’s back .
Attention!
When sliding the cooker into place pay special attention not to trap the power
supply cable in the stability bracket.
Pay special attention to the gas connection hose.
=
=
Fig. 8.8
