25
C-V351/C-V301 (EN)
ENTER
Main Menu 1
C D
Tuner
Tape1 / MD
6ch Input
LD / DVD
VCR
AUX
ENTER
Recording
When recording sound with a recorder component of
KENWOOD, synchro recording is possible by setting the
INPUT SELECTOR to select TAPE1 or MD according to the
connected component.
To record a music source
1
Select the source to be recorded.
When recording on TAPE, for source, select
anything except TAPE1.
When recording on MD, for source, select anything
except MD.
2
Set the recording unit (cassette deck or MD recorder) to
recording mode.
3
Play the source and start recording.
Notes for using the 6ch INPUT source
When 6ch INPUT is selected as the input source, the operation is
subjected to the following restrictions.
1. Neither the video or audio can be recorded.
2. The monitor function cannot be activated by pressing the
TAPE 2 (MONITOR)
key.
3. Surround play, its adjustment, STEREO mode play, tone
adjustment and Source Direct play are not available.
Each press switches the indication.
Select the icon of the source to be played.
÷
*
1
*
2
The TAPE 1 display can be changed to the MD display and the LD
display can be changed to the DVD display.
0
÷
For the recording using a cassette deck or MD recorder, read the
instruction manual of the cassette deck or MD recorder.
÷
Recording sound from a MD recorder onto TAPE 1 is not possible
because the input selection is overlapped.
÷
Remember that varying the input level during recording causes the
recording level to be varied.
÷
The EON overriding does not occur during recording.
Regarding TAPE 2 (MONITOR)
A cassette deck or graphic equalizer can be connected to this unit’s
TAPE 2 (MONITOR)
terminals. If you connect a graphic equalizer, turn the
TAPE
2 (MONITOR)
key ON. If you connect a 3-head cassette deck, you can monitor the source sound, or the sound being recorded, while recording.
Pressing the
TAPE 2 (MONITOR)
key lets you compare the recorded sound and the source sound. Refer to the operating manual for the component
you connected for further details.
GRC
1
VCR
2
AUX
3
TAPE 1 / MD *1
4
TUNER (frequency display)
5
CD
6
LD / DVD *2
7
6ch INPUT
INPUT
RC
GRC
RC/Main unit
Main
Menu
