20
Power Input
Power is supplied by the USB host device via the USB cable
Power consumption
105mA max
MIDI
In & Out (via USB)
Analogue outputs
CV on 3.5mm mono jack (V/oct or Hz/V or 1.2V/oct)
Gate on 3.5mm mono jack (Gate or S-trig – with or without pullups)
Aux1
on
3.5mm
mono
jack
Digital outputs
Aux2 & Aux3 on 3.5mm mono jacks (off=0 volts on=+5 volts)
Sync 24 on 5 pin 180 degree DIN socket
Weight
450g
Dimensions
130 x 97 x 40 mm
D to A conversion
2 x 16 bit high quality / low drift DACs
Non-volatile memory
EEPROM (no back-up battery required)
Processor
32 bit ARM processor
USB connector
Type B socket – USB A to B cable supplied 1.8 metre
WARRANTY
The
USB SOLO
comes with a 12 month (from purchase date) back to base warranty, (i.e. customer
must arrange and pay for carriage to and from Kenton Electronics).
WEEE DIRECTIVE
Correct disposal of this product at the end of its working life.
(applies to the European Union & other European countries with separate collection systems)
The crossed-out wheelie bin symbol affixed to this product indicates that it should not be disposed of
with other household wastes at the end of its working life. To prevent possible harm to the environment
or to human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable re-use of material resources.
Household users should contact either the retailer where they purchased the product, or their local
government office for details of where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
www.kenton.co.uk
Kenton Electronics Limited
Brookfarm House, Station Road, South Wimbledon, London, SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
Firmware version #1004 e. & o. e.
9
th
July 2009
SPECIFICATIONS
