REV D: 05/16/20
KENTMASTER MFG. CO., INC.
1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016
UNITED STATES OF AMERICA
TELEPHONE
:
(818) 359-8888
FAX:
(818) 303-5151
Page 19 of 21
7.
A BALANCER IS REQUIRED FOR OPERATION AND USE OF THIS TOOL. WEIGHT OF TOOL MUST FALL WITHIN
WEIGHT RANGE OF BALANCER.
8.
INSTALL BALANCER ABOVE WORK AREA. BALANCER MUST HAVE SUFFICIENT VERTICAL TRAVEL SO
OPERATOR CAN REACH ENTIRE WORK AREA WITH TOOL WITHOUT STRAIN.
9.
ADJUST BALANCER ACCORDING TO THE OPERATOR'S PREFERENCE AND COMFORT.
WE STRONGLY SUGGEST THAT AN ADDITIONAL SAFETY CHAIN BE USED TO CHAIN
BALANCER TO OVERHEAD TROLLEY. THIS ADDITIONAL MEASURE OF SAFETY WILL
HELP REDUCE INJURIES.
OPERATING INSTRUCTIONS
ONLY TRAINED PERSONNEL ARE TO OPERATE THIS TOOL.
1.
HOLD TOOL FIRMLY AT BOTH TRIGGER HANDLES. SQUEEZE TRIGGERS SIMULTANEOUSLY TO ACTIVATE
TOOL.
2.
DO NOT EXERT EXCESSIVE PRESSURE. ALLOW TIME FOR THE TOOL TO CUT.
BLADE REMOVAL AND CLEANING
.
ALWAYS DISCONNECT POWER SUPPLY FROM TOOL BEFORE INSTALLING OR
REMOVING BLADE FROM TOOL.
ALWAYS WEAR WIRE MESH GLOVES WHEN INSTALLING OR REMOVING BLADES FROM TOOL.
1.
REMOVE COLLAR (ITEM NO. 1, FIG. NO. 1).
2.
REMOVE BLADE (ITEM NO. 2, FIG. NO. 1).
3.
CLEAN ALL PARTS REMOVED WITH SOAP AND WATER.
4.
SHARPEN OR REPLACE BLADES WHEN NECESSARY.
5.
REASSEMBLE IN REVERSE ORDER.
SERVICE
1.
KEEP GOOD RECORDS OF ALL SERVICE ACTIVITY AND INCLUDE TOOL IN YOUR PREVENTIVE MAINTENANCE
PROGRAM.
2.
USE ONLY GENUINE KENTMASTER REPLACEMENT PARTS TO ASSURE PROPER PERFORMANCE OF TOOL.
3.
CONTACT THE KENTMASTER SUPPLIER NEAREST YOU FOR PARTS
AND CUSTOMER SERVICE INFORMATION.
!
WARNING
!
WARNING
!
WARNING
!
WARNING
