KENTMASTER 210-J, Operating Manual

Page: 11 / 27

REV C: 06/06/18
HANDLES
FRONT HANDLE
Figure 8 1302560: FORWARD HANDLE ASSEMBLY
KENTMASTER MFG. CO., INC.
1801 SOUTH MOUNTAIN AVE., MONROVIA, CALIFORNIA 91016 UNITED STATES OF AMERICA
 TELEPHONE: (626) 359-8888 FAX: (626) 303-5151
11 OF 27
1302560: FORWARD HANDLE ASSEMBLY
ITEM PART # DESCRIPTION QTY
1 1302420 HANDLE 1
2 1302430 TRIGGER 1
3 1302440 SPRING 1
4 1302450 PLUNGER 1
5 1302460 HOLDER, PLUNGER 1
6 1302470 HOLDER 2
7 1302480 HANDLE BAR, FRONT 1
8 1302490 HANDLE BAR, REAR 1
9 1701550 SPRING 2
10 2000690 SWITCH 1
11 7018750 ELBOW 1
12 7310120 HOSE, ARMORED 1
13 8086020 SCREW 4
14 8211080 SCREW 1
15 8211180 SCREW 1
16 8500580 NUT 2
HANDLE DISASSEMBLY:
1. In the wirebox identify wires to switch of
handle assembly. Identify which wires they
connect with prior to removing caps. Refer to
wiring diagram.
2. Pull out switch (Item 10, Fig. 11).
3. The drilled hole in the housing (item 1) has
been filled with silicon to help keep moisture
out of electrical system. Remove silicon prior
to reassembly.
HANDLE REASSEMBLY:
1. Reverse steps 1 and 2 of “Handle
disassembly”.
2. After installing switch, fill drilled hole that
switch wires were sent thru with silicon. This
helps keep moisture out of electrical system.
3. Insert closed end of spring (item 3) into
plunger (item 4).