ENGLISH
INSTRUCTIONS FOR USE
4
909 6311 000(3)2009-11
Razor E17
WARNING!
The machine power supply cable is grounded and the relevant plug is grounded too. In case of machine
–
malfunction or breakdown, grounding connection reduces the risk of electric shock.
The power supply cable plug must be connected to an appropriate outlet, which is grounded according to
–
law in force.
Improper connection can cause electric shock. Consult a qualiied technician to make sure that the outlet is
–
properly grounded.
Do not tamper with the power supply cable plug. If the power supply cable plug cannot be connected to the
–
outlet, have new grounded outlet installed by a qualiied technician, according to the law in force.
Before connecting the power supply cable to the electrical mains, check that frequency and voltage, shown
–
on the machine serial number plate (1), match the electrical mains voltage.
Do not unplug the machine by pulling the supply cable. To unplug, grasp the plug, not the cable.
–
Do not handle the plug or the machine with wet hands.
–
Turn off all controls before unplugging.
–
Regularly check the power supply cable for damages, cracks, cuts and wear. If necessary, replace it.
–
If the power supply cable is damaged, it must be replaced by the Manufacturer or by an authorised Service
–
Centre.
To avoid any risk, if the power supply cable is damaged, contact KENT Service Center or a qualiied
–
technician.
Do not pull or carry the machine by the power supply cable and never use the power supply cable as a
–
handle. Do not close a door on the power supply cable, or pull the power supply cable around sharp edges
or corners. Do not run the machine on the power supply cable.
The brushes must not come into contact with the power supply cable.
–
Keep the power supply cable away from heated surfaces.
–
To reduce the risk of ire, electric shock, or injury, do not leave the machine unattended when it is plugged
–
in. Disconnect the machine from the electrical mains when not in use and before performing maintenance
procedures.
Do not leave the machine unattended without being sure that it cannot move independently.
–
Always protect the machine against the sun, rain and bad weather, both under operation and inactivity
–
condition. Store the machine indoors, in a dry place: This machine must be used in dry conditions, it must
not be used or kept outdoors in wet conditions.
Before using the machine, close all doors and/or covers.
–
Do not allow to be used as a toy. Close attention is necessary when used near children.
–
Use only as shown in this Manual. Use only KENT’s recommended accessories.
–
Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine
–
moving parts.
Do not use the machine on incline.
–
Do not use the machine in particularly dusty areas.
–
While using this machine, take care not to cause damage to people or objects.
–
Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.
–
Do not put any can containing luids on the machine.
–
The machine working temperature must be b32°F and +104°F (0°C and +40°C).
–
The machine storage temperature must be b32°F and +104°F (0°C and +40°C).
–
The humidity must be between 30% and 95%.
–
When using loor cleaning detergents, follow the instructions on the labels of the detergent bottles.
–
To handle loor cleaning detergents, wear suitable gloves and protections.
–
Do not use the machine as a means of transport.
–
Do not allow the brush/pad to operate while the machine is stationary to avoid damaging the loor.
–
In case of ire, use a powder ire extinguisher, not a water one.
–
Do not tamper with the machine safety guards and follow the ordinary maintenance instructions
–
scrupulously.
Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged.
–
Always keep the openings free from dust, hairs and any other foreign material which could reduce the air
low.
Do not remove or modify the plates afixed to the machine.
–
This machine cannot be used on roads or public streets.
–
Pay attention during machine transportation when temperature is below freezing point. The water in the
–
recovery tank or in the hoses could freeze and seriously damage the machine.
Use brushes and pads supplied with the machine and those speciied in the User Manual. Using other
–
brushes or pads could reduce safety.
In case of machine malfunctions, ensure that these are not due to lack of maintenance. Otherwise, request
–
assistance from the authorised personnel or from an authorised Service Center.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
