5
Getting Started
Before first use
• Unpacking:
This product has been packaged to protect it against
transportation damage. Unpack the appliance and keep the original packaging
carton and materials in a safe place. It will help prevent any damage if the
product needs to be transported in the future, and you can use it to store the
appliance when it is not in use. In the event it is to be disposed of, please
recycle all packaging materials where possible.
• Safe packaging disposal:
Plastic wrapping can be a suffocation hazard for
babies and young children, so ensure all packaging materials are out of their
reach and disposed of safely.
• Inspection:
Unwind the cord to its full length and inspect it for damage. Do not
use the appliance if the appliance or its cord have been damaged or are not
working properly.
In case of damage, contact our after sales support centre for
advice on examination, repair or return of the damaged product.
Assembly of the base
•
Before the appliance can be used, the
base plate
must be
attached to the
underside of the main body.
•
Place the
base plate centrally to align with the body underside and align
the
locking clips to fit into the recessed sockets. Rotate until this locks into
position.
•
Invert the product to the correct orientation, place on the floor and check the
product is stable.
NOTE:
When using in the heating mode for the first time, or after a long
period
of storage, it is normal for the heater to emit a burning odour due to
lubricants
used during production or from dust deposits, this will pass quickly.
This is no
cause for concern, ensure good ventilation.
