AFTER SALES SUPPORT
'8' @
0800 422 274
Important Safety Instructions
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use
, even if you are familiar with
this type of product. The safety precautions enclosed herein reduce the risk of
fire, electric shock and injury when correctly adhered to. Make sure you
understand all instructions and warnings.
Keep the manual in a safe place for
future reference
, along with any warranty information, your purchase receipt
and the original packaging carton. If you sell or transfer ownership of this
product, pass on these instructions to the new owner.
Always follow basic
safety precautions and accident prevention measures when using an
electrical appliance, including the following:
Electrical safety and cord handling
•
•
Voltage:
Make sure your outlet voltage and circuit frequency correspond to the
voltage stated on the rating label. If this is not the case, do not use the fan
.
Water
:
To protect against fire and electric shock, do not immerse the
cord,
plug or the fan itself in water or other liquids, or expose the electrical
connections to water. Ensure your hands are dry before handling the plug or
switching on the appliance. Do not use the fan outdoors or on wet surfaces.
Protect it from liquid spills.
No adaptor, no extension cord
:
Do not use the heater with a power board or
double adaptor as this may overheat and create a fire risk. Do not use it with
an extension cord because the cord may overheat and cause a risk of fire.
• Damage
:
Check the power cord regularly for visible damage. If the cord is
damaged, it must be replaced by the manufacturer, its authorised service
centres or appropriately qualified personnel in order to avoid any hazards.
WARNING!
Do not pick up or operate the appliance if the power supply cord,
plug or housing is damaged, or after it malfunctions or has been dropped
or
damaged in any manner.
• Protect the power cord:
*
Do not operate the fan with the cord coiled up; always fully unwind.
*
Do not twist or kink the cord or let it touch heated surfaces.
*
Do not put any stress on the cord where it connects to the product.
*
Never carry the fan by the cord.
*
Arrange the cord away from any traffic area so no one will trip over it.
*
Do not run the cord under carpeting or cover it with rugs or runners.
• Connection:
To insert the plug, grasp it firmly and guide it into outlet.
• Disconnection:
Switch off and unplug the fan from the power outlet when it is
not in use, during lightning storms and before cleaning, servicing, moving or
storing the fan. Grasp the plug and remove it from the outlet, do not pull the
cord when disconnecting.
2
•
