Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363.
If the plug has to be removed, it should be cut off and carefully
disposed of immediately. To avoid a possible shock hazard, do
not insert the discarded plug into a mains socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains
lead must be connected as shown below. The wires in the mains
lead fitted to this appliance are coloured in accordance with the
following code:
The Blue wire must be connected to the terminal marked N or
coloured Black.
The Brown wire must be connected to the terminal marked L or
coloured Red.
The Green and Yellow wire must be connected to the terminal
marked E or coloured Green.
Check that there are no cut or stray strands of wire inside the
plug.
Use a 13 Amp BS 1362 fuse, only use BSI or ASTA approved
fuses.
If you are in any way unsure which plug or fuse to use, always
refer to a qualified electrician.
After replacing or changing a fuse on a moulded plug, the cover
must be refitted to the plug; the appliance must not be used with-
out a fuse cover.
Connect Green &
Yellow to Earth (E)
Connect Blue to
Neutral (N)
Connect Brown to
Live (L)
Ensure the outer
sheath of the mains
lead is securely held
by the cable clamp
