29
SLAVE c/n supports 4 channels and 3 different groups in TTL, manual
and multi wireless modes. The SLAVE unit and the MASTER unit must
be on the same channel and group in order to work.
When in SLAVE mode, press the ‘zoom’ button twice so that the
channel number flashes, then use the left and right buttons to select
a channel (between 1-4). Once selected, press the ‘zoom’ button
again and the group letter will flash – press left and right to select a
group. Press the ‘set’ button or wait until the icon stops flashing to
confirm settings.
When in SLAVE mode, the flashgun is completely controlled by the
MASTER flash and will operate as per the information on the MASTER
flash display.
Summary of Contents for SPEEDFLASH KFL101
Page 1: ...SPEEDFLASH KFL101 SPEEDFLASH KFL101 INSTRUCTION MANUAL...
Page 2: ......
