22
Wireless MASTER flash mode (MASTER Canon)
Wireless MASTER flash mode (Canon) can be divided into:
•
Automatic wireless control mode (E-TTL Auto MASTER Canon)
•
Manual wireless control mode (Manual MASTER Canon)
•
Stroboscopic wireless control mode (Multi stroboscopic MASTER
Canon)
Press the ‘left clear’ button until the LCD shows the Canon MASTER
mode.
Set the MASTER control unit wireless channel
Press the ‘zoom’ button twice so that
the channel number flashes, then use
the left and right buttons to select
channel (between 1-4).
Note: The SLAVE flash mode should be
the same as the MASTER unit.
MASTER mode supports high speed
sync, does not support rear curtain sync.
Switch off MASTER mode
If you only need the SLAVE function, you can switch off the MASTER
function on your speedflash. Press the ‘zoom’ button
until
begins to flash, then use the left button to switch off the MASTER
function so that the LCD
display shows
To switch MASTER mode back on, follow the steps above, but press
the right button until the LCD display shows
again.
Summary of Contents for SPEEDFLASH KFL101
Page 1: ...SPEEDFLASH KFL101 SPEEDFLASH KFL101 INSTRUCTION MANUAL...
Page 2: ......
