kenro SPEEDFLASH KFL101, Instruction Manual

Page: 20 / 38

20
Zoom settings
Press the ‘zoom’ button until the XXmm symbol flashes (where
XX is the zoom value), then use the directional keypad to set the
appropriate values. Pressing right increases the zoom value; pressing
left decreases the zoom value. Press the ‘zoom’ button again to exit
setup.
A M M M M M M M M M M
Automatic 18 24 28 35 50 70 85 105 135 180
About automatic (A) and manual (M) zoom settings
Automatic zoom:
Adjust the flash
range by pressing left or right as above.
When the A is displayed, the speedflash
will automatically adjust flash coverage
(zoom set to 35mm in auto). In
cameras that support E-TTL and i-TTL,
the lens zoom will increase or decrease
to adapt to different flash coverage.
Manual zoom: Adjust the flash range by pressing left or right as
above. When the M is displayed, you can manually adjust the flash
coverage according to the table above.
When under manual zoom, make sure that flash coverage extends to
cover the lens zoom, so that shadows do not appear at the edge of
the photograph.