- 13 -
DRY VACUUMING OPERATION
1. Verify that the power cord is
disconnected from the outlet.
2. In order to prepare your vacuum for
dry vacuuming, make sure the cartridge
filter completely covers the filter cage
against the power head. Your wet/dry
vacuum comes with the cartridge filter
pre-installed. For installation instructions,
see page 18.
3. Place the filter retainer on the top of
the cartridge filter and tighten down by
turning the retainer handle clockwise.
4. Optional: For improved dust filtering,
fit dust bag flange onto the inlet port,
taking care not to damage the bag. Dust
bag sold separately.
5. Place the power head back on the
collection tank and secure it in place
using the latches.
6. Insert the larger end of the hose onto
the vacuum port and secure by turning
clockwise until tight.
7. Choose the desired accessories and/
or the telescoping wand, then insert
onto the end of the hose. The air flow
regulation allows you to manually
change the amount of vacuum suction.
When the two triangles are aligned,
suction will be weakest.
Summary of Contents for KW3050
Page 62: ... MD ...
