Kenmore D02 M90348, Use And Care Manual

Page: 26 / 36

+
-
+
–
14
15
•
Place cooking grates onto grate rests.
•
Insert ends of Warming Rack pivot wire into holes in sides of gril lid. Insert ends of Warming Rack leg wire into holes in
sides of firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are
on top, Warming Rack is installed upside-down.
•
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto
ignitor.
•
Place heat diffusers over tube burners and the heat diffuser for sear burner over sear burner by inserting tabs into slots
in front of firebox. Opposite ends of heat diffusers rest on pins in back of firebox.
He
at Diffuser
Back of Fir
ebo
x
He
at Diffuser
Front of Fir
ebo
x
Sear Burner
Heat Diffuser,
F/Sear Burner
(Stainless Steel)
Heat Diffuser
(Black)
Warming Rack
Leg Wire
Cooking Grate
Pivot Wire
AA Battery
Pivot Wire
(side to side)
Leg Wire
(side to side)
Warming Rack Wires
(front-to-back)
Pin
26 • 466226113