background image

- 4 -

IMPORTANT SAFETY INSTRUCTIONS

• Do not immerse vacuum cleaner, or 

charging adapter in water or other liquids.

• Always turn the vacuum off before 

connecting or disconnecting the 
motorized carpet and bare floor nozzles.

• Store the cordless vacuum indoors. Put 

the cordless vacuum away after use to 
prevent accidents.

• Keep your work area well lit. 
• Keep the vacuum moving over the carpet 

surface at all times to avoid damaging 
the carpet fibers.

• Do not vacuum up any liquids.
• Do not use in an enclosed space where 

vapors are present from paint, paint 
thinner, moth-proofing substances, 
flammable dust or other explosive or 
toxic materials.

• Do not pick up hard or sharp objects 

such as glass, nail, screws or coins that 
could damage the vacuum cleaner.

• To avoid excessive heat and damage 

to unit or batteries, do not operate the 
vacuum while charging.

• Do not use extension cords or outlets with 

inadequate current carrying capacity.

• DO NOT MUTILATE OR INCINERATE 

BATTERIES AS THEY WILL EXPLODE AT 
HIGH TEMPERATURE.

• Do not expose a battery pack or appliance 

to fire or excessive temperature. Exposure 
to fire or temperature above 265°F (130°C) 
may cause explosion.

• Leaks from battery cells can occur under 

extreme usage or temperature conditions. 
If the liquid gets on skin, wash quickly 
with water. If liquid gets into the eyes, 
flush them immediately with clean water 
for a minimum of 10 minutes. Seek 
medical attention.

• While there is no shock hazard from 

electrical terminals located on the 
vacuum, a burn could result from metal 
objects being inserted into the terminal 
areas. Vacuum cleaner terminals should 
always be kept free of objects.

• Store charger indoors in a cool, dry 

area, not exposed to weather to avoid 
electrical shock and/or damage to the 
vacuum cleaner.

• Changes or modifications to this unit 

not expressly approved by the party 
responsible for compliance could void 
the user’s authority to operate the 
equipment.

• Charging improperly or at temperatures 

outside of the specified range may 
damage the battery and increase the risk 
of fire.

• You are responsible for making sure that 

your vacuum cleaner is not used by anyone 
who is unable to operate it properly.

• Have servicing performed by a qualified 

repair person using only identical  
replacement parts. This will ensure that 
the safety of the product is maintained.

• Do not modify or attempt to repair 

the appliance or the battery pack (as 
applicable) except as indicated in the 
instructions for use and care.

• 

This appliance is designed for household 

use only!

NOTICE

This device complies with part 15 of the 

FCC Rules. Operation is subject to the 

following two conditions.
1. This device may not cause harmful 

interference.

2. This device must accept any interference 

received, including interference that may 
cause undesired operation.

Summary of Contents for Complete SSV

















Reviews: