Cover
Base
4. Rotate cover back. Press cover firmly
until side and rear latches snap into
place.
NOTE:
Make sure there is no gap
between the cover and base.
5. Turn PowerMate
®
upside down and
replace the four (4) screws that secure
the cover to the base.
TO CHECK THE BRUSHES
Base
Support
Bar
Worn Brushes
New Brushes
When brushes are worn to the level of the
base support bars, replace the brushroll
assembly.
TO REPLACE BRUSHROLL ASSEMBLY
1. Remove the floor brush from the
PowerMate
®
.
2. Remove PowerMate
®
cover, belt and
brushroll assembly. See “To Remove Belt”
in BELT CHANGING AND BRUSHROLL
CLEANING (page 10-11).
3. Install new brushroll assembly.
4. Reinstall belt and PowerMate
®
cover. See
“To replace belt” in BELT CHANGING
AND BRUSHROLL CLEANING (page 11-
12).
NOTE:
See REPLACEMENT PARTS for
part number and purchase details (page 5).
- 12 -
BELT CHANGING AND BRUSHROLL CLEANING
BRUSHROLL SERVICING
WARNING
Electrical Shock or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do
so could result in electrical shock or
personal injury from vacuum cleaner
suddenly starting.
Summary of Contents for BC1001
Page 15: ... ...
