11
EN
GL
IS
H
4. Remove the hose from the water pump. Clean the water
inlet hose hanging in the water pan. Scrape off any mineral
deposits and then wash with mild soap or detergent in warm
water.
5. Remove the water distributor from the freezing plate. It
is held in place by rubber endcaps. Remove the inlet
hose and clean all water distributor holes and the small
orifice in the inlet side of the distributor. When replacing
the distributor, make sure the endcaps are located in the
freezing plate flange holes and that the water distributor
holes face down.
6. Wash the interior components you have just removed with
mild soap or detergent and warm water. Rinse in clean
water. Sanitize in a solution of 1 tablespoon (15 ml) of
household bleach mixed with 1 gallon (3.8 L) of warm
water.
NOTE: Do not wash plastic parts in the dishwasher.
Plastic parts cannot withstand temperatures above 145°F
(63°C).
Inlet hose
Water pump
7.
Wash the storage bin, door, gasket, and ice scoop with
mild soap or detergent and warm water. Rinse with
clean water. Sanitize with the chlorine bleach and water
solution.
8. Replace the interior components (water distributor,
hoses, water pan, and ice retainer baffle).
9. Check the following:
•
Hose from water valve is in water pan.
•
Rubber drain plug is in water pan.
•
Water distributor is seated and holes are facing
down.
•
Hose is reconnected to pump and water distributor.
•
Hose from water pan is inserted into storage bin
drain opening.
10. Reconnect electrical harness. Replace cutter grid and
thumb screws.
11. Plug in ice maker or reconnect power.
Filtering and treating
water
In most areas, it will be beneficial to filter or treat the water
being supplied to the ice machine. It can improve the
reliability of the machine, reduce water maintenance, and
produce the best quality of ice.
The installation of a polyphosphate feeder will generally
reduce scale buildup and the ice machine will require less
frequent cleaning.
Municipal water systems are generally treated with chlorine
to maintain a safe, potable water supply. Activated carbon
filters will sufficiently remove the residual chlorine from the
water and reduce surface staining of stainless steel materi-
als in the ice machine.
Freezing plate
holes
Inlet hose
Endcaps
Orifice
Freezing plate
Water distributor
Summary of Contents for 86482
Page 14: ...14 Notes ...