Kenmore 795.74092.41 Series, Service Manual

Page: 102 / 112

- 102 -
13-1-17 Defrosting (removing frost)
1. Defrosting starts each time the COMPRESSOR running ime Between 7~50 hours.
2. Defrosting stops if the sensor temperature reaches 41F(5C) or more. If the Sensor doesn’t reach 41F(5C) in 1 hours, the
defrost mode is malfunctioning. (Refer to the defect diagnosis function)
3. Defrosting won’t function if its sensor is defective (wires are cut or short circuited)
13-1-18 Defect Diagnosis Function
1. Automatic diagnosis makes servicing the refrigerator easy.
2. When a defect occurs, the buttons will not operate.
3. When the defect CODE removes the sign, it returns to normal operation (RESET).
4. The defect CODE shows on the Refrigerator and Freezer Display.
* LED check function: If simultaneously pressing Ultra Ice button and freezing temperature adjustment button for a
second, display LED graphics on. If releasing the button, the LED graphic displays the previous
status.
You can check the error code Within 3-hour Period from initial error
13-1-19 Auto pantry
1. The temperature control will automatically start upon the selected Auto Pantry temperature control.
2. You can adjust the Pantry control with three different temperature ranges by pressing the activate button.
13-1-16 How to set the display mode and cancel it
1. With the refrigerator door open, keep pressing the Refrigerator Temp Button and ULTRA ICE Button more than 5
seconds, then it goes to the display mode with Special Beep Sound.
2. Perform the same way again to cancel the display mode.
3. All freezing units do not work at the display mode.