Kenmore 795.5131 Series Page 30 Use & Care Manual Download

Page: 30 / 33

TROUBLESHOOTING GUIDE

THE ICEMAKER IS NOT PRODUCING ICE OR ICE CUBES ARE FREEZING TOO SLOWLY

The freezer temperature is cold enough to produce ice.

Wait 24 hours after hook-up for ice production. See the

CONTROL PANEL FEATURES

section.

Door left open.

Check to see if something is holding the door open.

THE DOORS ARE DIFFICULT TO OPEN

The gaskets are dirty or sticky.

Clean gaskets and the surfaces that they touch. Rub

a thin coat of appliance polish or paraffin wax on the
gaskets after cleaning.

The door is reopened within a short time after having

When you open the door, warmer air enters the

been opened.

refrigerator. As the warm air cools, it can create a

vacuum. If the door is hard to open, wait 5 minutes
to allow the air pressure to equalize, then see if it

CUBES PRODUCED BY ICEMAKER ARE TOO SMALL

Water shutoff valve connecting refrigerator to water line

Call a plumber to clear the valve.

may be clogged.

Check if...

Then...

Check if...

Then...

Check if...

Then...

opens more easily.

AUTOMATIC ICEMAKER DOES NOT WORK

Icemaker power switch in the

O (off)

position.

Move the switch to the

I (on)

position.

Water supply turned off or not connected.

See the

CONNECTING THE WATER LINE

section.

Freezer compartment too warm.

Wait 24 hours for the freezer to reach its ideal

Piled up cubes in the storage bin cause the icemaker

Level cubes by hand or shake the bin occasionally.

to shut off.

Check if...

Then...

temperature.

TEMPERATURE IS TOO WARM OR THERE IS INTERIOR MOISTURE BUILDUP

The air vents are blocked. Cold air circulates

Locate air vents by using your hand to sense airflow and

from the freezer to the fresh food section and

move all packages that block vents and restrict airflow.

back again through air vents in the wall dividing

Refer to

ENSURING PROPER AIR CIRCULATION

the two sections.

section for the location of air vents.

Check if...

Then...

Summary of Contents for 795.5131 Series


































Search results

Summary of Contents for 795.5131 Series

Reviews:

Related manuals for 795.5131 Series

Brands by name

Popular brands

Kenmore 795.5131 Series, Use & Care Manual

Search results

Summary of Contents for 795.5131 Series

Reviews:

Related manuals for 795.5131 Series

Brands by name

Popular brands