5
16
REFRIGERATOR INSTALLATION
11
DOOR ALIGNMENT
Before adjust the doors, remove the base grille.
See
BASE GRILLE INSTALLATION
for reference.
First select your adjusting tool, it could vary.
Type 1
Adjusting tool: flat blade screwdriver
If the freezer compartment door is lower than the
refrigerator compartment door,
level them by inserting a
flat blade screwdriver into the groove of the left leveling
leg and rotating it clockwise.
Left leveling
leg
Height
If the freezer compartment door is higher than the
refrigerator compartment door, level them by inserting a
flat blade screwdriver into the groove of the right leveling
leg and rotating it clockwise.
Right leveling leg
Height
difference
difference
Height
difference
Height
difference
Type 2
Adjusting tools: wrench ” (8 mm) and
wrench ¾”
(19 mm)
Adjust the level when the refrigerator door is lower than
the freezer door during the installation of the refrigerator.
AFTER LEVELING THE DOOR HEIGHT
Make sure the front leveling legs are completely
touching the floor.
Height
difference
Height
difference
Using a ¾” (19 mm) wrench, turn the keeper nut clockwise to
lossen the keeper nut.
Keeper nut
Adjustment
hinge pin
Wrench
Up
Down
Using a ” (8 mm) wrench, turn the adjustment hinge pin
clockwise or counterclockwise to level the refrigerator and
After setting the level door, turn the keeper nut
counterclockwise to tighten.
Do not overtight the door adjustment screw. The hinge pin
can be pulled out. (Adjustable range of height is a maximum
of ½” (1.27 cm)).
freezer door.
5
16
Summary of Contents for 795.5131 Series
Page 33: ......
