28
Wall Oven Self-Cleaning Cycle
NOTE:
A smoke eliminator in the
oven vent converts most of the
smoke into a colorless vapor.
What to Expect during Cleaning:
While the oven is in operation, the oven heats to temperatures much higher than
those used in normal cooking. Sounds of metal expansion and contraction are
normal. Odor is also normal as the food soil is being removed. Smoke may appear
through the oven vent.
If heavy spillovers are not wiped up before cleaning, they may flame and cause
more smoke and odor than usual. This is normal and safe and should not cause
alarm. If available, use an exhaust fan during the self-cleaning cycle.
Self-Clean Cycle time length
For satisfactory results, use a 2 hour Self-Clean cycle for
light soils
and a 3
hour cycle for
average
or a 4 hour cycle for
heavy soils. NOTE:
The kitchen
area should be well ventilated using an open window, ventilation fan or exhaust
hood during the Self-Clean cycle. This will help eliminate the normal odors
associated with the Self-Clean cycle.
To Set the Controls for a Self-Clean Cycle or a Delayed Start
Self-Clean Cycle:
(
Note:
If you do not want to start a
Delayed
Self-Clean Cycle, skips steps 2 &
3.)
1.
Be sure the clock shows the correct time of day.
2.
Press
Delay
Start
.
3.
Press and hold the
pad to scroll to the desired start time of the delayed
Self-Clean cycle. Release the pad when the desired time is displayed.
4.
Press
Select
Clean
. "- -" appears in the display.
5.
Press the
or
once. "3:00" appears in the display for a 3 hour cycle.
To change to a 2 hour cycle press
. "2:00" appears in the display or to
select a 4 hour cycle press
. "4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close
automatically and the “Door Locked” indicator light will flash.
DO NOT
open
the oven door while the light is flashing (it takes about 15 seconds for the
oven door to lock).
6.
"
CLn
" will appear in the display during the Self-Clean cycle and the "Door
Locked" light will glow until the Self-Cleaning cycle is complete or cancelled
and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1.
The time of day or "
End
" will appear in the display window and the “Clean”
and "Door Lock" light will continue to glow.
2.
Once the oven has cooled down for about 1 HOUR and the "Door Lock" light
has gone out, the oven door can be opened.
3.
If “
End
” is in the display and the Select Clean indicator light remains ON,
press
STOP
Clear
. The time of day will appear in the display.
NOTE:
When the oven is cool, wipe away any residue or powdered ash with a
damp cloth or paper towel.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1.
Press
STOP
Clear
.
2.
Once the oven has cooled down for about 1 HOUR and the "Door Lock" light
has gone out, the oven door can be opened.
3.
Restart the Self-Clean cycle once all conditions have been corrected.
To avoid possible
burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the oven
when opening the door to allow hot
air or steam to escape.
DO NOT
force the
oven door open. This can damage
the automatic door locking system.
Use caution and avoid possible
burns when opening the door after
the Self-Cleaning cycle has
completed. The oven may still be
VERY HOT.
Summary of Contents for 790.4784 Series
Page 35: ...ENGLISH 35 Notes ...
