18
Cook
Time
Timer
Set/Off
Oven
Preheat
Door Locked
Add 1
Minute
STOP
Clear
Oven
Lockout
3
Broil
Warm &
Hold
Bake
Bake
Delay
Start
Select
Clean
Wall Oven Control Pad Features
Note:
The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also,
push buttons or pads may be shaped differently than those appearing in this Use and
Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
*Note
: The
OVEN
indicator light on the electronic display will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature.
When preheat indicator light turns OFF, your oven is ready.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation.
1.
To tell if your oven is set for normal or silent operation press and hold
Delay
Start
for 7 seconds. "
- -
" or "
SP
" (speaker)
appears in the display.
2.
Within 5 seconds, press the
or
pad to switch between normal sound operation and silent operation mode.
The display will show either "
- -
" or "
SP
".
3.
Wait 5 seconds to return to normal operating mode.
If "
SP
" appears, the control will operate with normal sounds and beeps. If "- - " appears, the control is in the silent
operation mode.
Temperature Conversion
(Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1.
Press and hold
Broil
for 7 seconds until °F or °C appears in the display.
2.
Press the
or
pad to change °F to °C or °C to °F.
3.
Wait 5 seconds to accept the changes or press
STOP
Clear
to accept the changes.
FEATURE
INDICATOR
LIGHTS
—
These lights
show which
feature is in
use.
SELECT CLEAN
PAD
Used to select
the Self-Cleaning
cycle. A 2, 3 or 4 hour
Self-Clean time may
be selected (some
models).
COOK TIME
PAD
Used to
enter the length
of the baking
time.
CLOCK SET
PAD
Used to
set the time
of day.
UP and DOWN ARROWS PADS
Used
along with the function pads to select
oven temperature, cook time, start time
(when programming an automatic start
time), time of day, clean time and
minute timer.
TIMER SET/OFF PAD
Used to set or cancel
the minute timer. The
minute timer does not
start or stop cooking.
Also, TIMER SET/OFF
Pad is used to set the
Continuous Bake
Feature.
OVEN, PREHEAT & DOOR LOCK LIGHTS*
The
“Oven” light
will glow each time the oven is turned on. The
“Preheat” light
will glow when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven temperature.
The
“Door Locked” light
will flash until the door locks when the
self-clean cycle is in use. It glows constantly after the door locks
(some models).
DELAY START PAD
Used to set the
desired start time for baking. May be
used with COOK TIME to program a
delayed bake cycle or to program a
delayed clean cycle.
OVEN
INTERIOR
LIGHT PAD
Used to turn
oven interior light
ON and OFF.
BROIL PAD
—
Used to select
the variable
broil function.
BAKE PAD
—
Used to select
the bake
function.
STOP CLEAR PAD
— Used to clear
any function previously entered
except the time of day and minute
timer. Press STOP CLEAR to stop
cooking. Also the STOP CLEAR
pad is used to activate oven lockout
setting. (some models).
ADD 1 MINUTE PAD
Used to add 1
minute to the Timer Countdown. This
feature works with the Kitchen Timer
only and does not affect any cook time
or start time functions. (some models).
WARM &
HOLD PAD
—
Used to set the
Warm & Hold
feature.
Summary of Contents for 790.4784 Series
Page 35: ...ENGLISH 35 Notes ...
