Kenmore 790.4500series Use & Care Manual Download Page 23

Page: 23 / 48

ENGLISH

Setting Oven Controls

Setting Convection Roast

This method of cooking enables you to obtain the best results when roasting. The oven can be programmed to convection
roast at any temperature from 170°F to 550°F (77°C to 288°C). Remember to use tested recipes with times adjusted
for convection roasting when using the convection mode. Times may be reduced by as much as 30% when using the
convection feature. This oven is equipped with multiple fan speeds for even cooking when baking and better tasting meats
when roasting. It will use a faster fan speed for roasting which will quickly strip the cold air away from the meats replacing
it with warm air (making a crisp outside type of searing) sealing in juices for better tasting meats.

INSTRUCTIONS

PRESS

DISPLAY

Conv

Convert

Conv

Roast

START

Conv

Roast

START

Figure 6

Figure 7

Figure 8

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

CONV BAKE

Figure 1

Figure 3

Figure 4

Figure 2

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

After the oven has reached the desired temperature, the control will beep and

CONV ROAST

light will stay on.

Note:

The

Bake, Broil and Convection elements will cycle for better heat distribution. When convection roasting is complete press

STOP

Setting Convection Convert

The

Conv

Convert

CONV CONVERT

pad is used to automatically convert a standard

baking

recipe for convection baking. When

set properly, this feature is designed to display the actual converted (reduced) temperature in the display.
Convection Convert may

ONLY

be used with a

Conv Bake

Timed Conv Bake

or a

Delay Start

(Delayed Timed Conv

Bake) setting. When used with a Timed Bake or a Delay Start (Delayed Timed Bake) setting, the Convection Convert will
display a “

” for check food when the bake time is 75% complete (See Fig. 8). At this time the oven control will sound

3 long beeps at regular intervals until baking had finished. When the bake time has completely finished the control will

display

End

and will sound 3 long beeps every 30 seconds until the

STOP

pad is pressed.

To change from a normal bake recipe to a convection
bake recipe (example: changing a 400°F normal bake
recipe to a convection bake recipe)

When the conv bake mode is on at 400°F (Figure 6), press

Conv

Convert

. «

CONV

BAKE

» and the oven temperature

adjustment

will appear briefly in

the display (for this example it is 375°F) (Fig. 7) then the actual oven
temperature will be displayed. A beep will sound once the

adjusted

oven

temperature is reached. The display will show “375°”, «

CONV BAKE

and the fan icon (Fig. 7).

NOTE

: When using a Cook Time, the convection

convert will not operate if you have a timed bake under 20 minutes.

To Set the oven to Convection Roast at 375°F

1. Arrange oven racks.

2. Press

Conv

Roast

; «

350

will be displayed;

CONV ROAST

will flash (Fig.

1).

3. Enter the desired roasting temperature using the number pads

(Fig. 2).

4. Press

START

; The actual oven temperature will be displayed,

CONV ROAST

and the fan icon will be displayed (Fig. 3). The

Bake, Broil and Convection elements will also cycle for better heat
distribution.

To Change the Convection Roast temperature
(example: changing from 375°F to 425°F)

1. Press

Conv

Roast

; «

375

» will be displayed;

CONV ROAST

will flash (Fig. 2).

2. Enter the desired roasting temperature using the number pads

(Fig. 4).

3. Push

START

; the current oven temperature,

CONV ROAST

and the

fan icon will be displayed.

Summary of Contents for 790.4500series

















































Search results

Summary of Contents for 790.4500series

Reviews:

Related manuals for 790.4500series

Brands by name

Popular brands

Kenmore 790.4500series, Use & Care Manual

Search results

Summary of Contents for 790.4500series

Reviews:

Related manuals for 790.4500series

Brands by name

Popular brands