Kenmore 790.4500series Use & Care Manual Download Page 38

Page: 38 / 48

The

FLEX CLEAN

Flex

Clean

DELAY START

Delay

Start

pads and length of clean cycle, controls the Delayed Self-Clean operation.

The automatic timer will turn the oven

on and off

at the time you select in advance. Be sure to review TO START THE

SELF-CLEAN CYCLE for recommended clean times.

To Start the delayed Self-Clean Cycle

INSTRUCTIONS

PRESS

DISPLAY

To set the control for the Self-Cleaning Cycle to
start at a delayed time and shut off automatically
(example: 3 hour self-clean cycle to start at 4:30)

1. Be sure the clock is set with the correct time of day and the

oven door is closed.

2. Press

Flex

Clean

. «

CLEAN

» will flash and «

3:00

will show in

the display (Figure 1). The control will automatically clean for
a 3 hour period (default self-cleaning cycle time). Note: If a 2

or 4 hour clean time is desired, press

for 2

hour or press

for a 4 hour clean time. Set the

cleaning time based on the amount of soil—light, medium or
heavy (

See previous page).

3. Press

START

. The «

DOOR LOCKED

» icon will flash;

CLEAN

icon and the letters «

CLn

» will remain on in the

display (Figure 2).

4. Press

Delay

Start

. Enter the desired start time using the number

pads

(Figure 3).

5. Press

START

. «

DELAY

», «

DOOR LOCKED

» and «

CLEAN

icons will remain on (Figure 4).

6. As soon as the control is set, the motor driven oven door lock

will begin to close automatically. Once the door has been
locked the «

DOOR LOCKED

» indicator light will quit flashing

and remain on.

7. The control will start the self-cleaning at the set start time, for

the period of time previously selected. At that time, the icon
«

DELAY

» will go out; «

CLn

» and oven icon will appear in the

display (Figure 5).

When the Self-Clean Cycle is Completed

1. “

HOT

” will appear in the display.The time of day, the «

DOOR

LOCKED

» and «

CLEAN

» icon will remain in the display

(Figure 6).

2. Once the oven has cooled down for approximately 1 HOUR,

and the «

DOOR LOCKED

» and icon are no longer

displayed, the oven door can then be opened (Figure 7).

Flex

Clean

START

Delay

Start

START

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Self-Cleaning

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV

ROAST

BAKE

WARM

BROIL

PROBE

Summary of Contents for 790.4500series

















































Search results

Summary of Contents for 790.4500series

Reviews:

Related manuals for 790.4500series

Brands by name

Popular brands

Kenmore 790.4500series, Use & Care Manual

Search results

Summary of Contents for 790.4500series

Reviews:

Related manuals for 790.4500series

Brands by name

Popular brands