background image

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will fit into a polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electri-
cian. Do not attempt to defeat this safety feature.

TAMPER-RESISTANT SCREW

This appliance is equipped with a tamper-resistant screw to prevent removal of the
outer cover.  To reduce the risk of fire or electric shock, do not attempt to remove the
outer cover.  There are no user serviceable parts inside.  Repair should be done only
by authorized service personnel.

NOTE:

Before first use, remove any labels, stickers, or tags which may be attached

to the body or soleplate of the iron.

1. Move the Lever to Smart Steam. Flip open the

Water Fill Hole cover.  Tilt the iron slightly for-
ward and use a measuring cup to pour water
into the hole until the level reaches the FULL
mark on the Water Window (A).  Do not overfill.

NOTE:

Be sure to aim the spout of the cup into

the slot of the Water Fill Hole. Close the cover.
Refill as needed.

2. Use ordinary tap water for ironing.  Do not use

water processed through a home softening system.  

3.

In extremely hard water areas,

use tap water the first time you use the iron. Then

3

1.

Water Fill Hole Cover

2.

Spray Nozzle

3.

Temperature Selector/Smart Steam™ Dial

4.

Magnifying Lens

5.

Spray Button

6.

Surge of Steam Button

7.

Comfort-Grip™ handle

8.

Pivoting Cord

9.

Push I/0 (ON/OFF) Button and Auto-Off Light

10. Cord Wrap/Stable Heel Rest

11. Fabric Guide

12. Water Window with FULL Mark 

13. 2-Way Steam Clean

TM

/Steam/Dry Lever

14. MAGNAGLIDE INOX

TM

Soleplate 

A

How To Use

1

2

3

4

5

6

7

8

9

10

14

13

12

11

*MAGNAGLIDE

TM  

and MAGNAGLIDE INOX

TM  

are trademarks of General Magnaplate Corp. and used under license.

Summary of Contents for 62984













Reviews: