13
12
LIGHT BULB REPLACEMENT
1. Using a screwdriver, remove a screw
as shown and lift off the lens.
2. Remove the bulb from the socket by
grasping bulb and pulling straight out.
3. Install the new bulb by pushing it
gently into the socket until the bulb
snaps into place.
TO REPLACE LIGHT BULB
WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from
vacuum cleaner suddenly starting.
ENGLISH
3. Reposition the drive belt on the
brushroll. Place ends of brushroll in
slots on sides. Reposition faceplate
and secure with two screws.
1. If a clog is present or debris is visible,
unscrew the two screws on the back
of the pet handimate to remove the
faceplate and clear any obstructions.
2. To clean debris from the brushroll,
remove the brushroll from the drive
belt and clean debris.
PET HANDIMATE MAINTENANCE
4. Reposition lens and secure with
a screw.
