17
aintenance
M
The water inlet filter
- error message will blink on the control panel when water does not enter the
detergent drawer.
- If your water is very hard or contains traces of lime deposit, the water inlet filter may
become clogged.
It is a good idea to clean it from time to time.
The drain pump filter
The drain filter collects threads and small objects left in the laundry.
Check regularly that the filter is clean to ensure smooth running of your machine.
CAUTION
Drain, using the drain hose, before opening the pump filter to remove objects.
Allow the water to cool down before cleaning the drain pump, carrying out emergency
emptying or opening the door in an emergency.
Before cleaning the washer interior, unplug the electrical power cord to avoid
electrical shock hazards.
1
100
2
3
2
3
1.
Turn off the
water tap.
2
. Unscrew the
water inlet
hose.
3.
Clean the filter
using a hard
bristle brush.
4
. Tighten the
inlet hose.
1. Open the lower
cover cap
by
using a coin. Drain
plug
to pull out
the hose.
2. Unplug the drain plug ,
allowing the water to flow out. At
this time use a vessel to prevent
water flowing onto the floor. When
water does not flow any more, turn
the pump filter
open to the left.
3. Remove any foreign objects from
the pump filter .
After cleaning, turn the pump
filter
clockwise and insert the
drain plug
to the original
place. Close the lower cover cap.
!
Summary of Contents for 501-40002
Page 2: ...MFL31245115 ...
