16
Door Removal / Reversal Instructions
Screw
Handle
Mounting
Screw
Button
Plug
Lock Handle
Over
Mounting Screw
Handle Style 1
To remove refrigerator handle:
(Handles may be easier to reverse while doors
are off.)
1. Remove two screws attaching handle to
top of refrigerator door.
2. Slide handle straight up and pull handle
off mounting screw on door.
3. Remove mounting screw from door and
install on other side, moving hole plugs
from corresponding holes to opposite side.
To attach refrigerator handle:
1. Place top of handle over mounting screw,
pull handle straight down until handle is
aligned with screw holes on top of door.
2. Secure top of handle with two screws
removed earlier.
Mounting
Screw
Nameplate
Screw
Lock Handle
Over Mounting
Screw
Handle
IMPORTANT
There are instructions for three handle styles on the following pages. To ensure proper installation
of all three handle styles, review these instructions and pictures thoroughly prior to handle
installation.
Additionally, before installing handles, make sure the door swing is correct. See the Door
Removal/Reversal instructions in this Use & Care Guide.
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION when installing these
handles. The rounded end of the handles may be sharp.
To remove freezer handle:
(Handles may be easier to reverse while doors
are off.)
1. Remove two screws attaching handle to
bottom of freezer door.
2. Slide handle straight down and pull handle
off mounting screw on door.
3. Remove mounting screw from door and
install on other side, moving hole plugs
from corresponding holes to opposite side.
4. Self-Adhesive Nameplate Models: Use
plastic putty knife to gently peel off
nameplate from door and reapply over
old holes.
To attach freezer handle:
1. Place top of handle over mounting screw,
pull handle straight up until handle is
aligned with screw holes on bottom of door.
2. Secure bottom of handle with two screws
removed earlier.
