On back of grill, place upper back panel between side panels and above lower back panel.
using one 1/4-20x1½” screw, 7mm lock washer, and 7mm flat washer on each side.
Do not fully tighten screws until side shelf installation is complete in later steps.
5
464261709 • 15
1/4-20x1½”
screw
7mm lock
washer
7mm flat
washer
Upper back panel
Lower back panel
6
Fascia, right side shelf
Bracket
Insert flange on right side shelf into side shelf brackets on side of firebox.
Attach rear of shelf using one 1/4-20x1½” screw, 7mm lock washer, and 7mm
Attach right side shelf using three 1/4”-20x3/4” screws, 7mm lock washers, 7mm flat washers, 1/4” nuts, shown A.
flat washer in lower hole, shown B.
flat washer, shown C.
Attach front of shelf and fascia using one #8x3/8” self-tapping screw and large
Attach front of shelf and fascia using one 1/4”-20x3/4” screw, 7mm lock washer, 7mm flat washer and 1/4” nut, shown D/C.
1/4-20x3/4”
screw
#8x3/8” self-tapping
Large flat
washer
1/4”nut
1/4”nut
washer
7mm flat
washer
7mm flat washer
A
C
screw
7mm lock
washer
7mm flat
washer
B
1/4-20x1½”
screw
Flange into bracket
D
Back of main control panel
1/4-20x3/4”
Igniter Switch
screw
Main control
panel
7mm lock
washer
7mm lock
1/4-20x1½”
7mm Lock washer
screw
Qty.1
Qty.2
1/4-20x1½”screw
Qty.2
Secure upper back panel in lower holes,
1/4-20x3/4”
Qty.4
Qty.5
Qty.5
Qty.1
Screw
washer
7mm lock
7mm flat washer
large flat washer
Qty.2
7mm flat washer
Qty.4
1/4” nut
#8x3/8”
self-tapping screw
Qty.1
Summary of Contents for 415.16657900
Page 27: ...NOTES 464261709 27 ...
