background image

CAUTION 

Read and follow all instructions before operating fan. Do not use fan if any part 

are damaged or missing.

WARNING 

1. To reduce the risk of fire or electrical shock, do not use this fan with any 

    solid-state speed control device. 

2. If the supply cord is damaged, it must be replaced by the manufacturer or its 

    service agent or other qualified person in order to avoid a hazard. 

3. This appliance has a polarized plug (one blade is wider than the other). To 

    reduce the risk of electric shock, this plug is intended to fit in a polarized outlet 

    only one way. If the plug does not fit fully in the outlet, reverse the plug. If it 

    still does not fit, contact a qualified electrician. Do not attempt to defeat this 

    safety feature. 

4. Do not leave the fan running unattended. 

5. Keep electrical appliances out of reach of children. Do not let them use the 

    appliances without supervision.

RULES FOR SAFE OPERATION 

1. Never insert fingers or any other objects through the fan housing when the 

    tower fan is running. Unplug the fan when moving it from one location to 

    another. 

2. Disconnect the fan before cleaning. 

3. To avoid overturning, be sure the fan is on a stable surface when operating it. 

4. To reduce the risk of electric shock, DO NOT use the fan by a window.

5. The rules about cord and plug as below:

  (1) This product employs overload protection (fuse). A blown fuse indicates an 

        overload or short-circuit situation. If the fuse blows, unplug the product from 

        the outlet. Replace the fuse as per the user servicing instructions (follow

        product marking for proper fuse rating) and check the products. If the 

        replacement fuse blows, a short-circuit may be present and the product 

        should be discarded or returned to an authorized service facility for 

        examination and/or repair.

  (2) Do not operate any fan with a damaged cord 
       or plug. Discard fan or or call the following 
       customer assistance number for possible 
       repair: 1-855-438-7899.
  (3) Do not run cord under carpeting.Do not cover 
       cord with throw rugs, runners, or similar coverings. 
       Do not route cord under furniture or appliances. 
       Arrange cord away from traffic area and 
       where it will not be tripped over.

       

       

        

       

       

       

       

        

1

Figure 1

READ AND SAVE THESE INSTRUCTIONS

  (4) This appliance is for private household use only. 

Summary of Contents for 405.34030310









Reviews: