12
V
ERTICAL
DISCHARGE
ONLY
:
6. Mount the 8” round adapter/damper (included in a separate
box) to the hood using 4 no. 8 x 3/8” sheet metal screws
(included).
FINALIZE THE INSTALLATION
1. Remove protective plastic film covering the lower flue
only.
Peel off both corners at the top of the upper
fl
ue.
Position the lower
fl
ue rear notches down (the ones with the
45° angle).
Gently slide upper
fl
ue inside lower
fl
ue, louvers end
fi
rst
(so that louvers are hidden inside lower
fl
ue, as they are not
needed).
HO0144
Both lower and upper
fl
ues are included with the hood, but
for a 10 foot ceiling, discard the provided upper
fl
ue and
use the optional extension
fl
ue, part no. 31131 (purchase
separately).
NOTE
2. Carefully slide in place decorative
fl
ue base (notches end
fi
rst) between the shaded part and the exterior wall of the
top of the hood.
HO0143
L
OWER
FLUE
REAR
NOTCH
L
OWER
FLUE
REAR
NOTCH
L
OUVERS
U
PPER
FLUE
TOP
CORNERS
HJ0041
V
ERTICAL
DISCHARGE
ONLY
:
7. Plug hood power cord into the outlet.
Slide a 8” metal round duct over the adapter/damper. Use
metal foil duct tape to seal the joint.
HJ0037
INSTALL THE HOOD
INSTALL THE HOOD
